5.2 KW PV Solar System Grid Tie Net Meter
Model SS5.2K

US Buyers Only

The shipping cost depends on where you live.
The system is shipped Via Truck from Sacramento, California
Call to Order so we can provide the shipping cost to your location.

5.2KW or 5200 Watt PV Solar system.  Comes with 20 VIKRAM 260 Watt 24 Volt DC Polycrystalline Solar Panels 5200 Watts Total Model SP260P,  5KW SolarEdge Inverter Model SE5000A-US-U, 20 SolarEdge 300 Watt Power Optimizers Model P300-5NA4ARM, and 50 MID or END Solar Panel Mounting Clamps.  See our Mounting Clamps for more information.

Please read the information below before viewing the specifications and pictures further down this page.

Federal Solar Tax Credit

Claim up to 30% of the cost of your new solar system for your home, including both equipment and installation.
Please note:  A consumer must have a federal tax liability to take advantage of the solar investment tax credit.

State Solar Tax Credit

Check with your state to see what credits are available.
Please note:  A consumer must have a state tax liability to take advantage of the solar investment tax credit.

Detailed Information about PV Solar Systems and Parts you will not find Anywhere in one location

Our Solar Products are for those who want to do it yourself (DIY) and save.  A complete solar system can be installed in only 3 days by yourself.   We provide all the information you need to make your installation and permitting easy.  If you do not want to install your system yourself, we provide information below on how to find a local contractor to install your system for you.

Why buy from Sunshine Solar?
Sunshine Solar has the lowest prices available on our complete solar systems, solar panels and solar panel mounting hardware.  We ship
throughout the USA directly to our customers from our suppliers, plus have many solar parts available for local pickup.  We have low overhead with a low profit margin so you get the best value, but we sell the best quality solar products available.  We have been in the solar business for 8 years so we share our experience with our customers to make your purchase and installation as easy as possible.

Why do solar systems that are installed by a solar company cost so much?
Most completely installed solar system are sold in the home.  Most solar companies spend thousands of dollars for a sales person to go to your home to sell you a solar system.  This is very expensive and you are paying their commissions or salaries.  Most solar companies that provide solar systems installed have high profit margins and use slick marketing and financing techniques to get you to purchase an overpriced solar system.  You get the same percentage of federal and state tax credits whether you have your solar system installed or you install the system yourself, so if you have average mechanical abilities and a friend to help with some of the installation, save thousands and install your system yourself.

Can I just hire a solar contractor to just do the installation?
Yes, if you do not want to install your system yourself, you can hire a solar contractor to install it for you.  You can have them provide the engineering and permitting or do it yourself and save money.  You will save money because you will not be paying for the expensive marketing and high profits from a solar company.  Be careful contacting solar companies as they may try to sell you a much more expensive system.  Contact your power company and they should be able to provide you with a list of solar or electrical contractors, or just do a search for solar contractors in your state.  Here is a link to networks a free service that will provide a list of solar contractors in your area.  Click Here  Make sure get at least 3 quotes and that they are all licensed contractors

What to do First
Replace all your incandescent light bulbs in your home to LED bulbs, and then do all you can to make your home as energy efficient as possible.  The air conditioner is by far the biggest user of electrical power in most homes, so make sure it is running properly.  Apply for a Net Meter from your power company.  Purchase this system so you have the information we provide to help you apply for a building permit with the proper information and drawings, and get any engineering needed so there are no delays.  We only provide our instructions, information, and drawings, after purchase via email.

PV Solar Systems
We have complete net metering on grid solar systems available at low costs that are less than half the cost of most systems installed, plus they qualify for the federal and state tax credits.  Most solar companies charge over $20,000 for a typical net meter grid tie system of about 5,000 watts installed.  The federal tax credit is currently 30%.  Check with your state to see what tax credit may be available.  We include detailed instructions with help in getting your building permit.  Most cities require engineering of the roof and mounting system, a drawing of your site with specifications, and a drawing showing labeling of conduit and power panels.  We provide examples to help guide you.

What is Net Metering
A net power meter is required for a solar power system or photo voltaic PV system to earn credits from your power company.  You cannot use your old meter as it will charge you for power you generate as it cannot determine the power flow direction.  You must apply for a net meter from your power company.  It usually takes 25 to 45 days to get approval, and then they will only install the net meter after you pass the final permit inspection.  It takes 1 or 2 weeks to get the net meter installed by your power company after they get a notice of the final inspection.  Power companies no long pay you for power you generate so you want to size the system so your solar credits equal the power you use.  A 5,000 watt system is all that is needed for most homes.  If you have a swimming pool, spa, electric car, or other high power usage device you may need another 1,000 to 2,000 watts or more.

Types of PV Solar Systems
A solar system is either a net metering system or a battery backup system.  Battery backup systems provide backup power when the power goes out, but requires many expensive batteries that need replaced every few years.  The costs of batteries and the costs of replacing batteries will offset most of the energy savings generated, and much of the power generated during the day is wasted as more power than is needed is generated during the day.  A net meter system will not provide power when the power goes out.  Hybrid systems can be built, but are expensive.  For power outages a small 2,000 watt generator and a few gallons of gasoline is a good backup and costs only $300 to $1000 depending on the quality of the generator.  All PV solar systems installed to your house must be permitted including a small battery backup system.

Types of Net Metering PV Solar Systems
There are 3 types of PV net metering solar systems.  The lowest cost uses a standard string inverter.  It is about 10% to 25% less efficient than the other two types.  The solar panels are wired in usually 2 series strings.  The string voltage is high voltage DC up to 500 volts DC and is dangerous to install or work on in sunlight.  The other two types of systems have about the same higher efficiency.  The most expensive uses micro inverters from enphase.  A micro inverter is installed on every solar panel and produces 240 volts AC.  The 240 volts AC again is dangerous to install or work on in sunlight.  The third type is a string inverter from SolarEdge.  It uses power optimizers installed on every solar panel.  These optimizers will optimize the current and voltage from the solar panels to provide optimum efficiency, particularly with partial shading of solar panels or solar panels installed of different plains, such as east or west instead of south.  This system is the safest to install and work on as the optimizers produce only 1 volt DC until they are connected to the inverter and the inverter is operating.  Proper operation can easily be verified while installing by checking the safe low voltage DC and adding the voltages to see that the panels are operating.  This is very important for the self installer.  For these reasons, the SolarEdge system is the system we sell. 

Types of PV Solar Panels
There are 2 types of Solar Panels Poly-Crystalline and Mono-Crystalline.  The manufacturing processes are different but they are very similar.  The Poly-Crystalline generally cost a little less.  Our PV solar systems come with high quality Poly-Crystalline solar panels and have a 25 year warranty.

PV Solar Panel Mounting System

Other Items you will Need.
You will need the mounting system mentioned above $150 to $300 or a rail mounting system $1,000 to $1,500, wire, conduit, and safety shutoff switch $300 to $500, a building permit $200 to $600, roofing and solar panel mounting engineering in many locations $250 to $600.


Solar Panels
Model SP260P

260 Watt Poly-Crystalline Solar Panel

The + 5WP positive output guarantee provides solar panels that are rounded down to the nearest 5 watt increment. So a 260W panel could be anywhere from 260W to 264.9 watts. This ensures you are getting the highest system efficiency and saves you the time the time-consuming chore of sorting the solar panels at the job site.  They have a 12-year Limited Product Warranty and 25-year Linear Service Warranty ensures a long, reliable product life. 


  • Low Iron Tempered Glass
  • High Area Efficiency
  • + 5 WP Positive Output Guaranteed
  • Poly-Crystalline solar cells
  • Extremely Reliable 
  • Excellent Low Light Response

Mechanical Data
Dimensions                        64.56 x 39 x 1.57 inches
Weight                                40 pounds
Frame Material                   Black Anodized Aluminum
Connector                           MC4

Electric Data
Rating                                260 Watts
Max Power Voltage           30.98 Volts
Open Circuit Voltage        37.75 Volts
Max Power Current          8.39 Amps
Short Circuit Current        8.95 Amps
Max System Voltage        1000 Volts
Efficiency                        15.98%

Click here to view the Datasheet


SolarEdge Inverter
Model SE3000A-US-U

SolarEdge PV inverter combines sophisticated digital control technology with efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. A proprietary data monitoring receiver has been integrated into the single phase solar inverter and aggregates the power optimizer performance data from each PV module. This data can be transmitted to the web and accessed via the SolarEdge monitoring portal for performance analysis, fault detection and troubleshooting of PV systems. The single phase inverter comes with a built-in DC switch, is lightweight and can be installed by a single person on a supplied bracket.

Single Phase Inverter Feature highlights
Solar inverters specifically designed to work with power optimizers
Excellent reliability with standard 12 year warranty (extendable to 20 or 25 years)
Small, lightweight and easy to install

Communication to internet via broadband or wireless ZigBee
Optional Rapid Shutdown functionality for NEC 2014 690.12
Optional revenue grade data, ANSI C12.1




SolarEdge Solution:


SolarEdge Power Optimizer
Model P300- 5NA4ARM

The SolarEdge power optimizer is a DC/DC converter which is connected by installers to each PV module or embedded by module manufacturers, replacing the traditional solar junction box. The SolarEdge power optimizers increase energy output from PV systems by constantly tracking the maximum power point (MPPT) of each module individually. Furthermore, the power optimizers monitor the performance of each module and communicate performance data to the SolarEdge monitoring portal for enhanced, cost-effective module-level maintenance. Each power optimizer is equipped with the unique SafeDC™ feature which automatically shuts down modules' DC voltage whenever the inverter or grid power is shut down.


Rated Input DC Power                  300 Watts
Max Input Voltage                        48 Vdc
MPPT Operating Range                8-48 Vdc
Max Short Circuit Current            10 Amps
Max DC Input Current                  12.5 Amps
Safety Output Voltage                   1 Vdc




Current Stock:
1,000.00 LBS
Manufacturers Warranty Only

Bulk Pricing Available

  • Buy 4 - 9 and get 10% off
  • Buy 10 - 100 and get 20% off

No Reviews Write a Review